Cantilever Arms

There is a comprehensive range of cantilever arms available from Hanley Solutions Limited. Cantilever Arms are mild steel hot dipped galvanised to BS EN 1461

All Cantilever Arms have a 14mm Fixing holes to suit M12, M10 or M8 bolts &nuts. They are manufactured from Mild Steel Channel Section, are Hot Dip Galvanised. Nominal back-plate thickness is 6mm.

Technical and loading data is available upon request

The standard stock profile of Hanley Solutions Cantilever Arms is GA = Hot dip galvanised after manufacture to BS EN ISO 1461 Made to order

Other finishes add the following S = Stainless steel 316 EC = Epoxy Painted Finish PO = Plain Oiled Self Colour